Efficient Heating Solutions that Keep your Home Warm
As the temperature drops, proper central heating becomes more and more important. Ensuring that your central heating system is working correctly should be a top priority for you and your family with a single faulty part capable of ruining your winter holiday season. There are a number of issues that can surface during the cold winter months. One common issue is frost damage, which can harm boilers and pipes, preventing them from working efficiently.
Traditionally, central heating systems were designed with the frost thermostat installed in close proximity to the boiler. The thermostat would start and stop the boiler until the desired air temperature was met. When the thermostat registered that extra heat was being released from the boiler, the central heating system would be shut down to conserve energy and prevent overheating of the home.
In recent years, the boiler and nearby pipes have been insulated much better (thus effectively saving energy) that the frost thermostat can no longer effectively determine when the air temperature has reached the requested degree. This can prove to be problematic, as it may lead to overheating.
The pipe thermostat is one solution. The product is installed on the boiler return pipe. This thermostat detects changes in pipe temperature and prevents overheating by shutting off the system when necessary. There are several UK companies that sell the frost thermostat and low limit pipe thermostat together in one kit. These products allow you to adjust room temperature and provide frost protection for your boilers and pipes.
Installation and set up of these new thermostats is simple and quite intuitive. Guidelines for complete wiring and installation arrive in the kit, ensuring simple installation. The frost thermostat is usually set to 5C and the pipe thermostat is commonly set to 25C. Additional pipe thermostats can be bought for other exposed pipes, to further insure that your system is completely protected.
Another heating regulation solution is the fully programmable room thermostat. Such devices are normally installed inside the living area (typically the hallway or the living room) to take a typical measure of the room temperature. Modern designs can be set to alter the temperature several times throughout the course of a day. More recent kits have wireless models that operate via a radio signal from the thermostat to the boiler. Such RF (Radio Frequency) thermostats are easy to install as they do not require wiring, but rather use a secure radio frequency to relay their reading to the boiler control unit.
Thermostats are a crucial part of the central heating system but there are other considerations to heating your home as efficiently as possible. Dividing the home into heating zones can be helpful. By focusing heat solely in the most populated parts of the home, less frequently used rooms can be kept at lower temperatures. This slight adjustment can reduce heating bills and heat the home more effectively.